Skip to content
Coating Equipment

Fully Automatic Mechanical Gripper Coating Machine

Model: GKX-DT420/DT800 Gripper Series

This machine takes the GKX single-tank dip-spin coater and makes it fully automatic. An overhead mechanical gripper picks up the basket and moves it through loading, dipping, spinning and unloading, so operators don’t have to handle baskets by hand. The result is steadier coating quality, less manual work and a dependable cycle time.

Customised to your production

GKX equipment is built to order. Configuration, capacity and layout are tailored to your workpieces, coating process and production requirements.

Product Description

This is a fully automatic version of the GKX DT-series single-tank dip-spin coater. An overhead gripper moves each basket into and out of the coating tank automatically, so the same coating process becomes a repeatable, hands-free cycle. It suits plants that want to automate small-to-medium volume production.

How it works

The overhead gripper takes hold of a loaded basket and lowers it into the coating tank. The basket is dipped and spun in the tank, and excess coating drains straight back in. The gripper then lifts the coated basket out and carries it to the unloading position. The spin direction, speed and time can all be programmed, so coating clears from recesses and blind holes.

Built to your requirements

Each machine is configured for the customer’s workpieces, coating process and target output. Share your requirements and the GKX team will advise on a suitable configuration.

Automation and control

A PLC with a touchscreen runs the whole cycle, saves recipes for each part type and monitors the process in real time. Because basket handling is automatic, each cycle runs the same way, operators are kept away from the coating, and the machine can be linked to loading conveyors and a curing oven as part of a complete coating line.

Product Video

See the Equipment in Action

Product video coming soon

A video for this machine will be added here. In the meantime, visit the GKX YouTube channel.

Visit GKX on YouTube
GKX-T800 fully automatic tilting coating machine

T800 Fully Automatic Tilting Coating Machine

Built for high-volume production, the GKX-T800 uses two baskets that work in turn, so one is being coated while the other is loaded or unloaded. Its tilting centrifuge sets the basket at an angle while it spins, which drains coating out of recesses and blind holes and gives a more even film on fasteners and small parts. Loading, dipping, tilted spinning and unloading all run automatically, so the cycle time stays steady.

View Details

Six-Basket Planetary Coating Machine

The GKX-X6-500 is built for high-volume coating of small parts. Its six baskets run on a planetary drive: each basket spins on its own axis while also revolving around the centre. Both speeds are adjustable, and changing the spin direction clears coating out of blind holes and recesses. A short cycle of about 1 minute per basket makes it well suited to continuous fastener production.

View Details

Three-Basket Planetary Coating Machine

The three-basket planetary coating machine uses the same planetary spin system as GKX’s six-basket model, in a more compact machine. Each basket spins on its own axis while it revolves around the centre, and both speeds can be adjusted. This clears coating out of blind holes and recesses and gives an even film. It suits plants with medium production volumes, a wide mix of parts, or limited floor space.

View Details

LET'S WORK TOGETHER

Looking for Equipment Tailored to Your Production Requirements?

Tell us about your coating process and production requirements. Our team can help you explore the right equipment solution for your application.