Skip to content
Coating Equipment

T800 Fully Automatic Tilting Coating Machine

Model: GKX-T800

Built for high-volume production, the GKX-T800 uses two baskets that work in turn, so one is being coated while the other is loaded or unloaded. Its tilting centrifuge sets the basket at an angle while it spins, which drains coating out of recesses and blind holes and gives a more even film on fasteners and small parts. Loading, dipping, tilted spinning and unloading all run automatically, so the cycle time stays steady.

Customised to your production

GKX equipment is built to order. Configuration, capacity and layout are tailored to your workpieces, coating process and production requirements.

Product Description

About the GKX-T800

The GKX-T800 is a fully automatic twin-basket tilting coating machine built for high-volume dip-spin coating. Its two Ø800 mm baskets work in turn, so one is coated and spun while the other is loaded or unloaded. This gives a capacity of up to 3,600 kg/h.

How it works

Parts are lifted and fed by a vibratory feeder, weighed into the basket, dipped and then spun. The basket tilts to about 45° for spinning, which throws coating out of recesses such as hex sockets and cross-recess heads and gives an even film without pooling. Once spun, the parts are tipped onto the curing oven belt, and the whole cycle runs automatically.

Built to your requirements

Each machine is configured for the customer's workpieces, coating process and target output. Share your requirements and the GKX team will advise on a suitable configuration.

Process control

The dip tank has a water jacket that keeps the coating at 19–22 °C. Recipes for each part type are saved, and the process is monitored in real time. Spin speed and lift speed are both adjustable. The coating cell is fully enclosed, and its doors are interlocked so the machine stops if one is opened. The controls use Schneider, Siemens and Mitsubishi components.

Technical Data

General Technical Specifications

Specifications depend on the configuration of each machine. Confirmed values will be provided by GKX for your application.

T800 Fully Automatic Tilting Coating Machine specifications
Equipment ModelGKX-T800
Processing CapacityUp to 3,600 kg/h (twin basket, alternating)
Basket Size / LoadØ800 mm, SS304, ≤150 kg per basket
Coating Cycle2.5–5 min per basket, depending on the part
Spin Speed / TiltAdjustable, ≤350 rpm; tilt angle approx. 45°
Dip Depth350 mm
Applicable WorkpiecesFasteners (e.g. M8–M16 bolts), stampings, hex-socket and cross-recess parts, blind-hole parts
Equipment Dimension2,760 × 2,150 × 3,210 mm

The specifications above are for a standard configuration and can be adjusted to your workpieces, coating process and production targets. A detailed technical proposal will be provided once your requirements are confirmed.

Product Video

See the Equipment in Action

Product video coming soon

A video for this machine will be added here. In the meantime, visit the GKX YouTube channel.

Visit GKX on YouTube

Six-Basket Planetary Coating Machine

The GKX-X6-500 is built for high-volume coating of small parts. Its six baskets run on a planetary drive: each basket spins on its own axis while also revolving around the centre. Both speeds are adjustable, and changing the spin direction clears coating out of blind holes and recesses. A short cycle of about 1 minute per basket makes it well suited to continuous fastener production.

View Details

Bottom-Discharge Four-Basket Planetary Coating Machine

Four-basket planetary coating machine. Product details to be confirmed.

View Details

Single-Tank Dip-Spin Coating Machine (DT420 / DT800)

The GKX-DT420 dips and spins in the same tank, all in one compact machine. Because the coating never leaves the chamber, almost none is wasted, which makes it a cost-effective choice for expensive coatings. Tanks and baskets change over quickly, so it suits small-batch production, process trials and laboratory use.

View Details

LET'S WORK TOGETHER

Looking for Equipment Tailored to Your Production Requirements?

Tell us about your coating process and production requirements. Our team can help you explore the right equipment solution for your application.