Skip to content
Coating Equipment

Cast-in Anchor Channel Swing Coating Machine

Model: GKX-Halfen

This coating machine is built for cast-in anchor channels and other long building parts. Spin coating doesn’t work for parts this length, so the machine dips the channels in coating and then swings them to drain off the excess. The swinging clears coating from inside the C-profile and around the anchors, giving an even, corrosion-resistant finish along the whole length.

Customised to your production

GKX equipment is built to order. Configuration, capacity and layout are tailored to your workpieces, coating process and production requirements.

Product Description

Cast-in anchor channels are long, open profiles with anchors attached, so they can’t be coated well in a standard spin basket. GKX’s swing coating machine handles them with a dip-and-swing cycle, so construction-industry manufacturers get the same zinc flake protection that fasteners get.

How it works

A rack of channels is lowered into the coating tank and then lifted out. The rack swings at a set angle and speed so excess coating drains off along the profile. Coating can’t pool inside the channel or around the anchor joints, and the film comes out even along the full length.

Built to your requirements

Each machine is configured for the customer’s channel lengths, profiles, coating process and target output. Share your requirements and the GKX team will advise on a suitable configuration.

Process control

The swing angle, speed, drain time and number of swings can all be programmed. Recipes for each profile are saved, and the process is monitored in real time. The machine can work on its own or be built into a coating line with a curing oven.

Product Video

See the Equipment in Action

Product video coming soon

A video for this machine will be added here. In the meantime, visit the GKX YouTube channel.

Visit GKX on YouTube
GKX-T800 fully automatic tilting coating machine

T800 Fully Automatic Tilting Coating Machine

Built for high-volume production, the GKX-T800 uses two baskets that work in turn, so one is being coated while the other is loaded or unloaded. Its tilting centrifuge sets the basket at an angle while it spins, which drains coating out of recesses and blind holes and gives a more even film on fasteners and small parts. Loading, dipping, tilted spinning and unloading all run automatically, so the cycle time stays steady.

View Details

Six-Basket Planetary Coating Machine

The GKX-X6-500 is built for high-volume coating of small parts. Its six baskets run on a planetary drive: each basket spins on its own axis while also revolving around the centre. Both speeds are adjustable, and changing the spin direction clears coating out of blind holes and recesses. A short cycle of about 1 minute per basket makes it well suited to continuous fastener production.

View Details

Three-Basket Planetary Coating Machine

The three-basket planetary coating machine uses the same planetary spin system as GKX’s six-basket model, in a more compact machine. Each basket spins on its own axis while it revolves around the centre, and both speeds can be adjusted. This clears coating out of blind holes and recesses and gives an even film. It suits plants with medium production volumes, a wide mix of parts, or limited floor space.

View Details

LET'S WORK TOGETHER

Looking for Equipment Tailored to Your Production Requirements?

Tell us about your coating process and production requirements. Our team can help you explore the right equipment solution for your application.